More Views

LEWITT LCT 940 Multipattern Large Diaphragm Condenser Microphone

SKU: LWT.2225.0008

LEWITT SKU: LCT940

Lewitt

In stock

€1,999.00

€1,666.00
OR

Description

  • Acoustical operating principle pressure gradient transducer,
  • externally polarized
  • Transducer D25,4 mm - 1 inch
  • Directional pattern omni
  • broad-cardioid
  • cardioid
  • super-cardioid
  • figure-8 and four additional intermediate pattern
  • selectable on remote control
  • Frequency range 20 ... 20.000 Hz
  • Sensitivity 23 mV / Pa (-33 dBV), cardioid
  • 20 mV / Pa (-34 dBV), omni
  • 23 mV / Pa (-33 dBV), figure-8
  • Signal / noise ratio (FET) 86 dB-A
  • Signal / noise ratio (Tube) 82 dB-A
  • Equivalent noise level (FET) 8 dB-A, cardioid (IEC 61672-1) - 9 dB-A, omni (IEC 61672-1) - 8 dB-A, figure-8 (IEC 61672-1)
  • Equivalent noise level (Tube) 12 dB-A, cardioid (IEC 61672-1) - 13 dB-A, omni (IEC 61672-1) - 12 dB-A, figure-8 (IEC 61672-1)
  • Dynamic range of FET mic. Amp. 135 dB-A
  • Dynamic range of Tube mic. Amp. 128 dB-A
  • Max. SPL for 0,5 % THD (FET) 143 dB, 0 dB pre-attenuation - 149 dB, 6 dB pre-attenuation - 155 dB, 12 dB pre-attenuation - 161 dB, 18 dB pre-attenuation
  • Max. SPL for 0,5% THD (Tube) 140 dB, 0 dB pre-attenuation - 146 dB, 6 dB pre-attenuation - 152 dB, 12 dB pre-attenuation - 158 dB, 18 dB pre-attenuation
  • Pre-attenuation pad 6 dB - 12 dB - 18 dB
  • selectable on remote control
  • Bass cut filter slope 12 dB / octave at 40 Hz - 6 dB / octave at 150 Hz - 6 dB / octave at 300 Hz
  • selectable on remote control
  • Rated impedance < 200 ohms
  • Rated load impedance > 1.000 ohms
  • Supply voltage custom power supply unit 230 V, 50 Hz - 110 V, 60 Hz
  • Current consumption 170 mA
  • Connector gold plated 11-pin XLR
  • Cable 8 m (26 ft)
  • 11-pin audio cable
  • oxygen-free copper
  • Dimensions (Mic) 192 x 60 x 46 mm
  • Dimensions (PSU) 250 x 150 x 70 mm
  • Net weight (Mic) 662 g
  • Net weight (PSU) 1930 g

Details

Type Studio
Best for Vocals
Series LCT
Polar Pattern Multi-Pattern
Transducer Type Condenser
Diaphragm Large
Diaphragm Diameter 25.4 mm - 1 in
Maximum SPL THD (FET): 143 dBSPL, 0 dB pre-attenuation, THD (Tube): 140 dBSPL, 0 dB pre-attenuation
Sensitivity (Cardioid): 23 mV/Pa, -33 dBV/Pa, (Omni): 20 mV/Pa, -34 dBV/Pa, (Figure-8): 23 mV/Pa, -33 dBV/Pa
Frequency Range 20 ... 20,000 Hz
Dynamic Range 135 dB (A)
Rated Impedance 200 Ω
Rated Load Impedance 1,000 Ω
Equivalent Noise Level FET: cardioid 8dB (A), omni 9dB (A), figure-8 8dB (A), - TUBE: cardioid 12dB (A), omni 13dB (A), figure-8 12dB (A)
Signal / Noise Ratio FET : 86 dB (A) - Tube: 82 dB (A)
Pre-Attenuation 0 dB, -6 dB, -12 dB, -18 dB
Low-Cut Filter linear, 40 Hz (12 dB/oct), 150 Hz (6 dB/oct), 300 Hz (6 dB/oct)
Connection Wired (XLR)
Cable Included
Supply Voltage PSU:230 V, 50 Hz - Supply voltage: 110 V, 60 Hz
Has PSU? Yes
Current Consumption 170 mA
Dimensions 192 x 60 x 46 mm - 7.5 x 2.4 x 1.8 in
Weight 662 g, 23.3 oz

Reviews

Write Your Own Review

You're reviewing: LEWITT LCT 940 Multipattern Large Diaphragm Condenser Microphone

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Quality
Price

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Message us
LEWITT LCT 940 Multipattern Large Diaphragm Condenser Microphone