WIRELESS FREEDOM FOR PEDALBOARDS

With the WL-50, it’s never been easier to bring wireless freedom to your pedalboard. Driven by new BOSS technology, the WL-50 delivers premium sound and a plug-and-play experience that eliminates all the hassles normally associated with wireless systems. The stompbox-sized receiver fits right alongside your other pedals, and includes a docking port for charging the transmitter and automatically setting the best wireless connection. There’s even a handy DC output, allowing you to distribute power to multiple pedals on your board.

• Plug-and-play wireless system in a stompbox-size format for pedalboards
• Optimum wireless connection set automatically, with no complicated setup required
• Newly developed BOSS technology delivers premium audio performance with rock-solid stability, ultra-low latency (2.3 ms), and 65-foot/20-meter range (line-of-sight propagation)*
• Built-in rechargeable battery in transmitter provides up to 12 hours of continuous playing time
• Plug the transmitter into the receiver’s docking port for charging and automatic wireless setup**
• Selectable cable tone simulation options: short, long, and bypass
• Receiver powered by optional PSA-S adaptor or two AA batteries
• With PSA-S adaptor power, the receiver’s DC output can distribute power to one or more pedals using an optional PCS-20A daisy-chain cable
• Spare WL-T Transmitter available separately
  
  * The transmission range may vary due to local conditions.
  ** To charge the transmitter, the receiver must be powered via a BOSS PSA-S adaptor. It’s also possible to directly charge the transmitter with a standard USB adaptor (5 V/500 mA or higher).

SPECIFICATIONS (RECEIVER)

Wireless Format BOSS proprietary digital audio format

Wireless carrier frequency  2.4 GHz

Compatible Channels 14

Transmission Range 65 feet line-of-sight

Latency2.3 ms

Dynamic Range110 dB or greater

Frequency Response20 Hz--20 kHz

Nominal Input Level-10 dBu

Input Impedance1 M ohm

Nominal Output Level-10 dBu

Output Impedance1 k ohm

Recommended Load Impedance10 k ohms or greaterControls

CABLE TONE switch (OFF/SHORT/LONG)

IndicatorsPOWER RECEIVE

Connectors INPUT jack: 1/4-inch phone type
OUTPUT jack: 1/4-inch phone type
TRANSMITTER jack: 1/4-inch TRS phone type
DC IN jack
DC OUT jack

Power SupplyAlkaline battery (AA, LR6) x 2AC adaptor (sold separately)

Current DrawDuring wireless operation: 60 mA

While charging transmitter: 320 mAExpected battery life under continuous useAlkaline battery (AA, LR6): Approximately 10 hours
* These figures will vary depending on the actual conditions of use.AccessoriesOwner's Manual
Leaflet USING THE UNIT SAFELY

Transmitter
Rubber foot x 4
Alkaline battery (AA, LR6) x 2

An AC adaptor (PSA-S series) is required to charge the transmitter (WL-T).Options (sold separately)AC adaptor: PSA-S series
Parallel DC cord: PCS-20A (DC Plug x8)

SIZE AND WEIGHT (RECEIVER)Width72 mm
2-7/8 inchesDepth121 mm
4-13/16 inchesHeight56 mm
2-1/4 inchesWeight (including battery)220 g

SPECIFICATIONS (TRANSMITTER (WL-T))

Nominal Input Level-10 dBu (1 M ohm)

Indicator BATTERY

ConnectorsInput plug: 1/4-inch TRS phone type
DC IN 5 V port: USB Micro-B type

Power SupplyRechargeable lithium-ion battery

Supplied from the DC IN 5 V portCurrent Draw350mABattery charging timeApproximately 3 hoursExpected battery life under continuous useApproximately 12 hours
* These figures will vary depending on the actual conditions of use.

SIZE AND WEIGHT (TRANSMITTER (WL-T))

Width87 mm
3-7/16 inchesDepth22 mm
7/8 inchesHeight36 mm
1-7/16 inchesWeight43 g