Description
- Acoustical operating principle Dynamic, moving coil
- Directional pattern Super-cardioid
- Frequency range 40 to 18.000 Hz
- Sensitivity; 3,5 mV / Pa (-49 dBV), passive mode - 7 mV / Pa (-43 dBV), active mode - 14 mV / Pa (-37 dBV), active mode
- Signal / noise ratio; 75 dB-A
- Equivalent noise level;19 dB-A, Super-cardioid (IEC 61672-1)
- Dynamic range, passive mode; 135 dB-A
- Dynamic range, active mode; 121 dB-A,0 dB gain - 115 dB-A,6 dB gain - 109 dB-A,12 dB gain
- Max. SPL for 0,5 % THD, active mode; 140 dB, 0 dB gain - 134 dB, 6 dB gain - 128 dB, 12 dB gain
- Gain settings, active mode 0 dB, 6 dB, 12 dB, switchable
- Bass cut filter slope; 12 dB / octave at 150 Hz - 12 dB / octave at 250 Hz
- Rated impedance < 600 ohms
- Rated load impedance > 1.000 ohms
- Supply voltage 48 V +/- 4 V (IEC 61938)
- Current consumption 5,5 mA (IEC 61938)
- Connector Gold plated 3-pin XLR
- Dimensions 51 dia. x 183 mm
- Net weight 336 g
Details
Type | Handheld |
---|---|
Best for | Vocals |
Series | MTP |
Polar Pattern | Super Cardioid |
Transducer Type | Dynamic |
Diaphragm | Medium |
Diaphragm Diameter | - |
Maximum SPL | - |
Sensitivity | 3.5 mV/Pa, -49 dBV/Pa |
Frequency Range | 40 ... 18,000 Hz |
Dynamic Range | Passive mode: 135 dB (A) - Active mode: 121 dB (A) 0 dB gain, 115 dB (A) 6 dB gain, 109 dB (A) 12 dB gain |
Rated Impedance | 600 Ω |
Rated Load Impedance | 1,000 Ω |
Equivalent Noise Level | 19 dB (A) |
Signal / Noise Ratio | 75 dB (A) |
Pre-Attenuation | - |
Low-Cut Filter | linear, 150 Hz (12 dB/oct), 250 Hz (12 dB/oct) |
Connection | Wired (XLR) |
Cable | Included |
Supply Voltage | 48 V +/- 4 V |
Has PSU? | No |
Current Consumption | 5.5 mA |
Dimensions | 51 dia. x 183 mm - 2 dia. x 7.2 in |
Weight | 336 g, 11.85 oz |
Reviews
Write Your Own Review
Product Tags
If you Like This, You may also Like These
More LEWITT Products
-
LCT441FLEX
€479.00
In stock
-
LCT240PROBK VP
€167.00
In stock